9 June 2010

a quick brick trick


has once again been the solution for new seating in the garden.  Last autumn a miscalculation with the paving brick order left us with an enormous stack of bricks unused outside the office and I've been wracking my brains on how to make the best use of these.  The Sunday workers are dab hands at knocking up gabion benches filled with random broken rubble but with whole bricks aplenty I thought we could try something  rather more sophisticated to provide seating to encircle the new south-end lawn.  
I mislay tape measures regularly so usually resort to sticks, my feet or similar to measure up.  The new bench was measured to be exactly one long piece of string in length.  Pauline and Michael, used to my methods and length of string in hand, cut the required pieces - two long sides, two end panels and lots of dividers - from a new roll of steel mesh, making do with a rather dilapidated pair of bolt cutters.  Laid out around the curve of the lawn, side by side and upright, the sides, the end panels and dividers were simply connected with steel spirals  'twizzled' into place.  
This made a long, curved, bottomless, topless box with sections along the whole length.  Lightweight and flexible, it is easy to adjust the position before firmly pressing the bottom edge, 'toothed' with the cut edges of the steel mesh, firmly into the soil beneath.  Full, it will be immovable.  
To make the body of the bench the sections are filled with a double layer of bricks stood on end and jammed in very tightly so there is little room for movement.  It was filled in no time.  To finish off the   cut ends of the spirals will be ground down smooth and it will be complete.  A big brick bench finished in a day - a bit bumpy on the behind maybe but it does look rather elegant.  
I sit and drink tea in a plastic chair by the office so will not be troubled by the bumpiness myself.  Let me know if you are.

1 comment:

  1. hi phoenix gardener (couldnt find your name on here so sorry for that!) can you enlighten me as to how you made the frame for your brick gambion - how do you shape and fix the wire and what guage is it to support the weight - how far in the ground etc what tools did you use to cut and shape the wire - like it a lot :) nice to see in a sprawling city x

    ReplyDelete